Pasenger window problem

[maid marianne]

Can anyone offer any advise please.

My passenger window goes down with no problem but when I put it up it goes about 2/3 the way up then back down to 1/3 up (approx) and stops.

Each time I try to shut it the same happens, the after probably 10 or so times it closes properly.

I have checked the channel to see if anything thing is stopping it but it all seems clear and smooth.

Any advise appreciated.

Thank you

[k1nty]

Can anyone offer any advise please.

My passenger window goes down with no problem but when I put it up it goes about 2/3 the way up then back down to 1/3 up (approx) and stops.

Each time I try to shut it the same happens, the after probably 10 or so times it closes properly.

I have checked the channel to see if anything thing is stopping it but it all seems clear and smooth.

Any advise appreciated.

Thank you

allright ,
ive the same problem on a door,problem is the orientation of the channel....which appears to be adjustable.havnt done mine yet.

[Mark1]

Had that with mine just gave the runner that comes out of the door and the rubber all round the window a good clean, now all works fine.

[Jamesyboy]

very very common, ive yet to see a calibra that dont do it, just remember where it stops and goes down, and just stop it your self and tap the button to get it the rest of the way!

[maid marianne]

Thank you all

I am going to try the stop/start Jamesboy

No time for cleaning today as I want to be out driving

But should have time to give it a clean tomorrow Mark 1.

Will let you know how it all goes

[Jamesyboy]

ahhh t5hats what was wrong with my vectra window, as it shut aquint, thats easy to do, i just put up with it on ine, it adds character imo

[maid marianne]

Thanks a lot

And guess what, used my car today, each time I had to close the window it worked perfectly

Must be something to do with the advise on here