remote locking

Any electrical issues

by Leigh » Thu Feb 02, 2006 12:52 am

Tony, I assume you've already searched for stuff , but I just looked back and found my original (longggggg...) posts when I was fitting my kit and having problems.
Theres a bit in there about some info I found relating to the wiring looms, unlocking probs etc..

Post is <a href="http://www.clubcalibra.net/forum/showthread.php?t=2297&highlight=remote+locking" target="_blank">Here</a>

(I did go back and solder the connections by the way!)
Leigh
 

by TonyDTM » Thu Feb 02, 2006 12:58 am

yeah, just read it. I guess it depends on which kit you go for as to which wires, what colours etc etc. As i have said (soooo many times) test lamp, solder iron and a good earth is all i needed to do the job and it took little over a couple of hours from start to finish. The instructions i had with mine weren't worth a toss, but the diagram and wire colours were a bit of a help. Bout 8 wires and a birds nest of cabling under the dash....

AND A GOOD EARTH !
TonyDTM
 

by Leigh » Thu Feb 02, 2006 9:03 am

D'oh, sorry TonyDTM, I meant has TonySE8 seen that post from ages ago.

that's what I get for posting when I'm tired.
[img]/smile.gif[/img]
Leigh
 

by tonyse8 » Fri Feb 03, 2006 12:02 am

thanks alot for that leigh!!! i know the stress and sleepless nites that you went through as i am experiancing exactly the same problem now, its lockin but not unlockin.i am pretty sure its not a earth problem on mine as it is on the glovebox earth. have not tried disconnecting the brown/red wire, if this works u shall have a BIG reward!!!
tonyse8
 

by tonyse8 » Sat Feb 04, 2006 6:41 pm

right guys after yet ANOTHER day of looking at the wiring and re checkin the wires i think i may have finally come to the problem!!!!! i noticed that when i picked up the main control box it locked the doors!!!?? everytime i touch it it locks them, gonna go vauxhalls monday and show them the problem and demand a replacement!
tonyse8
 

by Leigh » Sat Feb 04, 2006 8:29 pm

LOL, after all that! [img]/smile.gif[/img]
at least you know what the problem is now!
I know how frustrating it was when I was constantly rechecking the wiring, you sit there thinking "why the f*ck can't I see what's wrong.."
Leigh
 

by tonyse8 » Sat Feb 04, 2006 8:36 pm

thats so true leigh, the amount of times i have checked the wires is stupid! cant belive its the box! everytime u move it it locks the doors? have a feelin that taking it back to vauxhall is not gonna run smoothly! gonna leave it in the car and show them.
tonyse8
 

by tonyse8 » Mon Feb 06, 2006 3:15 pm

took the control unit back 2day, had a little arguement bout it, they were unsure if they could replace it! then i proved to them that it was faulty and they agreed to replace it. its comin 2morro so this could finally be the end of it all!
tonyse8
 

by tonyse8 » Tue Feb 07, 2006 4:37 pm

replaced old box with new 1 and it no longer locks when u touch it:) but supprise, supprise it still does not unlock:mad: i really cant figure this out now, i have phoned the helpline and they cant understand it either? there is 2 options now, either go vauxhall and get a replacement barrel£30 or pay some one to look at it? anyone got any ideas?????
tonyse8
 

by Leigh » Wed Feb 08, 2006 1:02 pm

Did you try with that red/brown wire disconnected Tony?
Leigh
 

by tonyse8 » Wed Feb 08, 2006 2:24 pm

yeah tried that leigh, anything else??
tonyse8
 

by Leigh » Sat Feb 11, 2006 9:00 pm

sorry mate, can't think of anything else to check now !
[img]/sad.gif[/img]
Leigh
 

by tonyse8 » Mon Feb 13, 2006 3:20 pm

thanks for the help anyway guys but i have now given in, got a auto electrican comin round 2morro. he suspects its wired wrong, gonna be gutted if it is as i have been over it so many times! will c what happens 2morro.
tonyse8
 

by Leigh » Tue Feb 14, 2006 1:49 pm

sorry mate, kinda hard to think of anything else without physically being in front of it, especially as you say with already going over it on here.
[img]/sad.gif[/img]
Leigh
 

by tonyse8 » Tue Feb 14, 2006 8:35 pm

finally got it workin 2day!!! still 1 loose connection 2 sort out and also need some veccy handles 2 finish the job. thanks for all your help guys.
tonyse8
 

PreviousNext

Who is online
Users browsing this forum: No registered users and 14 guests