Angel Eyes Inverter

big_gordy · by **big_gordy** » Tue Sep 27, 2005 12:54 am

HAS ANYONE GOT THE ANGEL EYES AND THE INVERTER (the black box) HAS BLOWN OR EVEN MELTED?

if it has how often have they went?

what power is going into the inverter is it 12v and whats the out put going to them?

**sofaman** · by **sofaman** » Tue Sep 27, 2005 2:32 am

Mine have been on for about 6 months with no problems.
But mine don't come on with the side lights. I have also fiited an Inline fuse.

The invertor is powered by 12V as for out put, I have no idea.
Try asking Fatladz on here as he sells them.

Hope this helps, sofa

**daddycool** · by **daddycool** » Tue Sep 27, 2005 5:16 pm

Mine were one of the first batch and they are still going STRONG!!!

big_gordy · by **big_gordy** » Thu Sep 29, 2005 12:55 am

what was the size of fuse u used m8?

**sofaman** · by **sofaman** » Thu Sep 29, 2005 1:55 am

I think it was 3amp fuse.
If your wiring to the side light then u won't need a fuse.

big_gordy · by **big_gordy** » Thu Sep 29, 2005 9:44 pm

was fitted to the side lights

big_gordy · by **big_gordy** » Thu Sep 29, 2005 9:57 pm

here is a few pics of the inverter!!!!!

<a href="http://homepage.ntlworld.com/djcheezy/Inverter.jpg" target="_blank">http://homepage.ntlworld.com/djcheezy/Inverter.jpg</a>
<a href="http://homepage.ntlworld.com/djcheezy/inverter%202.jpg" target="_blank">http://homepage.ntlworld.com/djcheezy/inverter%202.jpg</a>
<a href="http://homepage.ntlworld.com/djcheezy/inverter%203.jpg" target="_blank">http://homepage.ntlworld.com/djcheezy/inverter%203.jpg</a>

**FatLadZ** · by **FatLadZ** » Thu Sep 29, 2005 9:58 pm

check your alternator
sounds like they are spiked
or they have shorted out
sold 300ish sets of these thats 600 inverters and the only ones that have failed have been wired up backwards
fatz

big_gordy · by **big_gordy** » Thu Sep 29, 2005 10:01 pm

did work fir 2 months, not wired up backwards either fraz done it for me!

Fraz · by **Fraz** » Thu Sep 29, 2005 10:12 pm

what you mean "wired backwards" as in reverse polarity ..red to an earth and the black to the live???????

**FatLadZ** · by **FatLadZ** » Thu Sep 29, 2005 10:15 pm

looks like they had been installed with scotch blocks :eek:

thats not good as scotch blocks just crimp onto the wires by slicing into them.
i hope the wires were not left dangling as they could short out and cause the car to catch fire.
the instructions link is on every auction or on <a href="http://www.notmything.co.uk" target="_blank">www.notmything.co.uk</a>
fatz

**FatLadZ** · by **FatLadZ** » Thu Sep 29, 2005 10:21 pm

<div class='quotetop'>(daddycool)</div><div class='quotemain'>Mine were one of the first batch and they are still going STRONG!!!</div>

Yes because they were EXPERTLY fitted [img]/biggrin.gif[/img]
same as Fraz's [img]/laugh.gif[/img]
yea you guessed i fitted theirs [img]/laugh.gif[/img]

big_gordy · by **big_gordy** » Thu Sep 29, 2005 10:38 pm

nope they were not scotch bloked !!!!!

they were soldered and then insulated

big_gordy · by **big_gordy** » Thu Sep 29, 2005 10:41 pm

i see what u might think!!

i took them off first after they were not working to investigate and split the wire to test that power was going in first!

**FatLadZ** · by **FatLadZ** » Thu Sep 29, 2005 10:42 pm

This pic below shows to nicks in the wires as if it was scotchblocked thats what made me think it had been crimped on.
what and why are those wires bare?
fatz

Angel Eyes Inverter

Angel Eyes Inverter

About Us

Join ClubCalibra!