Front suspension leg

[Robs-se]

if you changing the lower arms you kinda need to undo the bottom balljoints Rob

I know, just good to know for future reference if you only have the springs to do. I always end up trashing the rubber on the balljoint with the fork splitter. never been able to get the other type in as not enough room

[v6 steve]

iv never bust a lower ball joint its the track rod end thats a b***h but if you take the whole arm off it saves you splitting it, and i would take off caliper and disc as the strut is pritty heavy and much easer to move about if there off

[Allys Cally]

as steve said its easier taking the whole arm off, thats what we done with the se9 last week. if your changing the wishbones i would do the arb droplinks and the track rod ends at the same time anyway.

[Robs-se]

as steve said its easier taking the whole arm off, thats what we done with the se9 last week. if your changing the wishbones i would do the arb droplinks and the track rod ends at the same time anyway.

All ready in the box awaiting for fitting. Just hoping the calipre bracket is still a 7mm key as i have 4 pot calipres on mine and not the standard ones