front and rear subframe

[rich30mex]

Have all calibras got the same sub frames or did they different ones to different models ie is the turbo 4x4 one the same as the v6 ecotec and redtop

[Allys Cally]

if i remember rightly the rear subframes are all the same, its only the turbo front subframe thats different due to the transfer box.

if i'm wrong no doubt i'll be corrected

[KERR_SE9]

You're right turbo is the only different one

[Fraz]

though the trailing arms will have 5 stud hubs for turbo and V6 and rear brakes I think may also be a different size ...could just simple swap the rear arms though

[v6 steve]

im 99% sure the rear is the same apart from the hubs but you can fit the 4x4 diff and drive shafts to a 4 stud if you wanted