Rear bumper mounts

[Phill]

I removed the rear bumper on the ecotech today and found the 4 bumper mounts are fooked. Can you still get new ones ? and from who ?. Thanks.

there wasn't much left of the 2 at the back of the bumper to get a picture.

[v6 steve]

no you cant get them any more but its not as if they would be to hard to make, the drain dosnt have any and iv not had any problems with out them

[Allys Cally]

no you cant get them any more but its not as if they would be to hard to make, the drain dosnt have any and iv not had any problems with out them

i dont have any on the se9 either

[Phill]

So is it just the screws at the arch that will keep them on ? I plan to put it on the V6 as it's in better condition til i can get a respray. I'm going to be removing the front bumper and swap that to. What should i expect when taking the front off ?. Any advice on removal and refit would be much appreciated.

[v6 steve]

there is 2 lugs that fit just under the number plate and 2 studs under the bumper too

[STEVA]

I can ask my friendly vx dealer next week if you want as they will do a search for me!!


Steva

[Phill]

there is 2 lugs that fit just under the number plate and 2 studs under the bumper too

The 2 plastic studs under the bumper are there but the brackets crumpled when i touched them. I think i will need to make 2 brackets for the studs.

[Phill]

I can ask my friendly vx dealer next week if you want as they will do a search for me!!


Steva

If you could check the 4 for me that would be grate Steva.

[STEVA]

No bother mate will do!


Steva

[craigyboy]

Alright phil,I made mine out of 25mm flat bar and
just gave them a coat of Hamerite,as I knew I would
struggle to get new ones

[craigyboy]

Alright phil,I made mine out of 25mm flat bar and
just gave them a coat of Hamerite,as I knew I would
struggle to get new ones

[James_Mould]

Have you tried Autovaux to see if they have any left? I managed to get a set from them last year.

[Phill]

Have you tried Autovaux to see if they have any left? I managed to get a set from them last year.

I will give them a call tomorrow James, Thanks.

Alright phil,I made mine out of 25mm flat bar and
just gave them a coat of Hamerite,as I knew I would
struggle to get new ones

Looks like you may have just talked yourself in to a job mate

[EddeyDancer]

I can supply these 'Rear bumper Brackets' if anyone wants Genuine Parts in Top Condition...